BOSHOR
GDYŃSKA FABRYKA OKIEN
Aluminium systems
PRODUCTS
ALUPROF aluminium systems allow to fabricate many different types of windows and doors, depending on the scope and specific requirements for functionality, aesthetics, thermal insulation, burglary resistance, smoke control or fire resistance. These include both structures with no thermal insulation designed to fabricate internal partition walls and door (MB-45, MB-45 Office, MB-EXPO) or balcony developments (MB-23P system ), and solutions based on thermally insulated profiles (MB-60, MB-70, MB-59S). A significant part of thermally insulated systems is available in “HI” variant, and is characterized by special inserts into the profiles that lower the thermal conductivity coefficient.
The MB series includes not only structures with the most common types of opening: side/bottom, but also lifting sliding patio doors MB-77HS, sliding windows & doors MB-Slide / MB-Slide ST, pivot windows“Pivot”, outward openable windows (e.g. MB-59S Casement) or windows dedicated to specific façade solutions, such as MB-60EF. We also offer “Industrial” type windows, dedicated to the revitalized historic buildings.
Our window & door systems offering includes special, fire- and smoke-resisting partition walling: MB-78EI with the fire resistance class of EI15—EI90 and the MB-118EI with the fire resistance class of EI120. This group of products is completed by smoke-resisting doors with no fire resistance: MB-45D.
ALUPROF’s wide range of solutions is systematically developed in order to best meet the needs of contemporary architecture and meet the requirements of increasingly stringent standards and regulations.
DOWNLOAD
System MB-86
The MB-86 window and door system is a product with very good parameters, which allows the various needs of users to be satisfied. Its sections are available in 3 design variants depending on the required thermal energy saving: ST, SI and AERO. MB-86 is the only aluminium window and door system in the world where aerogel is used – a material with excellent thermal insulation. The advantages of the MB-86 system also include the high durability of the profiles, which allows constructions with large overall dimensions and weight to be made.
System MB-70
MB-70 is a modern aluminium system intended for realizations of exterior architectural building elements requiring thermal and acoustic insulation, such as: various types of windows, doors, vestibules, display windows or spatial structures.
The system profiles have a three-chamber structure. The structural depth of the window sections is equal to 70 mm (frames) and 79 mm (casement), and for doors: 70 mm and 70 mm respectively. Such assumed depths of casement and frame sections give the effect of one surface from the exterior side after closing - in the case of the window, and the facing effect to the surface of casement and frames - in the case of doors. Shape of the profiles allows achieving slender and resistant window and door structures. In the MB-70 system, it is also possible to produce windows with the so-called “hidden casement” MB-70US and the MB-70 “Industrial”, finding its application during modernisations of post-industrial historic and monumental objects.
The MB-70 system is characterized by a very low value of the overall heat-transfer coefficient Uf, thanks to application of the thermal breaks and gaskets. This is of a great significance in the times of increasing demands for the energy management and the environment protection. The value of heat transfer coefficient for constructions of the MB-70 system - depending on the applied profiles and accessories – ranges between 1.5 and 2.39 W/m2K. In this system, the profiled "omega"-shaped thermal breaks are applied, of a width equal to 34 mm (windows) and 24 mm (doors), made from polyamide reinforced with fibreglass. The offered shape of thermal breaks increases the profile rigidity as compared to flat breaks and facilitates the section drainage, ensuring the appropriate thermal insulation in all atmospheric conditions at the same time. The thermal breaks applied in the windows have additional gaskets at the joining point with the sections, as well as tongues dividing the chamber between the internal and external aluminium sections into three parts.
A wide choice of colours in the standard palette makes it possible to meet the needs of our most demanding customers.
